SMARTROC - RPS 2200 TRM 2U
Line-interactive Sine Wave UPS
The Smartroc series features a flexible form factor Rack Mount and/or Tower Convertible design that can be used with critical application file servers, network switches, hubs and small computers.
Standard USB & RS232 provides optimal communications capability.
- Line interactive Sine Wave UPS
- Rack / Tower Convertible Design
- State-of-the-art Rotating LCD Panel
- Toroidal Transformer Technology
- Faster High Rate Charger
- Plug-and-play Fast External Battery Connector
- 97% High Efficiency in Utility Mode
- Double Utility Voltage Correction
- Hot Swappable Battery Function
- Customer Options Slot for Increased Flexibility.
- Patented RS232 and USB Communication Interfaces
- Smart Fan Operation
Rack/Tower Convertible Design
This design provides a flexible form factor which enables the installation of the Smartroc into a wide variety of environments.
Flexible form factor design enables the installation of the Smartroc into a wide variety of environments.
Toriodal Transformer Technology
The toriodal technology provides quiet and uncompromised performance, and Superior Output Voltage Regulation with Low Total Harmonic Distortion (THD). These are features are unique to the Smartroc and uncommon in the UPS industry.
Advanced Battery Discharge Management
The Smartroc automatically monitors the battery and voltage according to the back-up time during a power failure. This ensures and controls the Deep Discharge of the internal batteries.
State-of-the-art Rotating Display
The display may be rotated to improve the viewing angle whether in Rack or Tower configuration.
User Friendly LCD Display
Provides status and UPS parameters including load Level, Battery Charge Level, AVR Buck/Boost, Fault, etc.
Fast High Rate Charger
The Smartroc uses a high rate internal charger for faster recharge time.
Communication Software
Remotely test the UPS and monitor its major operating functions. Perform a graceful shut-down when the Utility fails.
Pure Sine Wave Output on Back Up Mode
The Sine Wave output ensures compatibility with all types of loads.
Additional Matching Battery Cabinets
Provides extended and continuous uninterrupted and protected power for use during blackouts.
Plug-and-Play Fast External Battery Connector
Simple and fool-proof modular battery connector when additional batteries are needed.
97% High Efficiency in Utility Mode
Meets energy efficient requirements with low noise and heat.
Hot Swappable Battery Function
Provides simple front panel access to Hot Swap the batteries without powering down or pulling out the UPS from rack.
Double Utility Voltage Correction
Automatically corrects the Utility for under or over voltage conditions without the use of the batteries.
Customer Options Slot
High flexibility in network configurations with Web/SNMP and AS400. A True Relay Card provides isolated output contacts for industrial and control panel applications.
Voltage Configuration DIP Switch
Convenient voltage selection provides increased flexibility for critical load applications and Utility voltage conditions.
Patent RS232 and USB Communication Interfaces
The patented technology allows the RS232, USB and SNMP slot to be activated simultaneously.
Smart Fan Operation
Quiet internal fans provide cooling for the components and batteries.
SMARTROC - RPS 2200 TRM 2U
Line-interactive Sine Wave UPS
Technical Specifications
| INPUT |
| Voltage Window (Vac) |
110/115/120 +35%-32%, DIP Switch Selectable |
| Frequency(Hz) |
45~65Hz+/-0.5Hz |
| OUTPUT |
| Voltage |
AC Mode |
110/115/120 Vac +8~-12% |
| Inv. Mode |
110/115/120 Vac +/-5% |
| Frequency |
50/60Hz ±0.1Hz |
| Capacity(VA/W) |
2200/1320 |
| Wave Form |
Pure Sine Wave |
| Transfer Time |
2ms typical |
| Autonomy |
>10 min. |
| DC START |
Yes |
| BATTERY |
| Type |
Sealed Lead Acid Maintenance Free |
| Capacity |
12V/7AH |
| Quantity |
8pcs |
| Voltage |
48Vdc |
| Recharge Time |
2~4 hours to 90% |
| DISPLAY |
| LED |
Utility Mode, Backup Mode & Battery Conditions |
| LCD |
Load Level(%), Battery Level(%), Bypass, AVR-Boost/AVR Buck,
Battery Low/Replace/Fault, UPS Fault, Site Wiring Fault, Overload |
| Self-Diagnostics |
Upon Power on and Software Control |
| PROTECTION |
| Overload |
AC Mode |
>110% Buzzer continuously alarms & shuts down after 10 minutes |
| Inv. Mode |
>120% Buzzer continuously alarms & shuts down after 10 seconds |
| Short Circuit |
AC Mode |
Breaker & Electronic Circuit |
| Inv. Mode |
Shut down automatically in 8 cycles |
| ALARMS |
| Audible and Visual |
Line Failure, Battery Low, Overload and Fault Conditions |
| PHYSICAL |
Dimensions
WxHxD (mm/inch) |
440x88x674/17.3x3.5x26.6 |
| Inlet |
NEMA 5-20P |
| Outlets(NEMA) 120V |
4 x 5-15R + 2 x 5-20R |
| Net Weight(kgs/lbs) |
45/99.2 |
| ENVIRONMENT |
|
| Operating Temperature |
0 to 40 C/ 32 to 104 F |
| Temperature Warning |
The battery design life is based on a temperature of 25 C/77 F, Ambient temperature above this range will affect battery life |
| Humidity |
95% RH Maximum, Non-Condensing |
| COMPUTER INTERFACE |
|
| Interface Type |
Standard RS232/USB Interfaces |
| Communication Slots |
Relay Contact Board, SNMP/WEB Card, etc. |
| Compatible Platforms |
Windows 95/98/NT/2000/XP/Vista |
| SAFETY CONFORMANCE |
|
| Quality Assurance |
ISO9001 Certified |
| Safety Standard |
EN62040-1-1 |
| EMC Standard |
EN62040-2, EN61000-3-2, EN61000-3-3, FCC Class A |
| Marks |
UL, cUL |
Specifications subject to change without prior notice
© 2000-2009 Rocstor - Rocsecure - Rocpower